ITLP Workshop Manufacturing - Level 1 - Safety Orientation + Saws & Drills

Welcome to the ITL Program's Skill-Building Workshop on "Manufacturing - Level 2 - Safety Orientation + Saws & Drills"

Before you start:

Please complete this self-guided workshop prior to taking the instructor-led workshop at the ITL Laboratory.

If you would like to register for the instructor-led workshop please sign up here.*

*You must complete the instructor-led workshop at the ITL Laboratory in order to gain access to the equipment in the ITL Laboratory.

What you will learn:

In this workshop series, you will learn the basics of how to use the woodworking machine tools in the ITLL Manufacturing Center. We will cover the safe operation of two drill presses, the table saw, the compound miter saw, and the vertical band saw. Participants will understand which machine is used for what types of materials and what types of cut can be made with each individual machine.

Challenge Level

This workshop is an "Access" workshop, intended to UNLOCK your path forward by training you in the proper handling and care of the Saws & Drills found in the Manufacturing Center. You must complete the self-guided workshop prior to attending the instructor-led workshop at the ITL Laboratory in order to gain access. Once completed, the instructor will register you in our system as an authorized user of the MC's Saws & Drills, at which point you will be able to use them with limited supervision.

We require: that you first complete the "Manufacturing Center Safety Orientation" Workshop prior to taking this workshop.

Challenge - Access (1).png

How to use this Canvas Community Course

Start with the Introduction tab to learn how to step through this self-guided workshop

Select the Workshop Outline tab to see an overview of the workshop content, and explore the slides and video recordings of this workshop, hosted by our ITLP Engineers

Select the Quiz tab* to be taken to this workshop's Exit Quiz to test your knowledge. Nice job, you completed the self-guided workshop!

*_{The Quiz tab is for CU students only)}

If you experience trouble accessing any of this workshop's content, please contact carolyn.nalezny@colorado.edu.

Thank you for visiting and enjoy your experience with engineering!

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (Links to an external site.).